| Customization: | Available |
|---|---|
| After-sales Service: | Manual Instruction |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Operation instructions
1. Pump waste oil to oil tank:
a Connect a well-selected oil drain pipe and oil exhaust pipe and then insert them in the sight oil hole of the engine with lubricant, next switch off the oil exhaust pipe;
b Turn on the switch of transparent glass connected to oil storage tank, switch off the elbow to prevent discharge of oil, switch off the quick coupler on the top of the tank and under the oil funnel;
c Connect the quick coupler on the top of oil measuring glass to compressed air tube and switch on, while the indication of the vacuum gauge will decrease;
d when the vacuum pressure lowers below 0.5 PA, switch on the oil exhaust pipe and thus the waste oil will be pumped out of the engine and flows to the tank quickly via the oil exhaust pipe.
2. Pump waste oil to transparent glass
a Connect a well-selected oil drain pipe and oil exhaust pipe and then insert them in transparent glass of the engine with lubricant, next switch off the oil exhaust pipe;
b Turn off the switch of transparent glass connected to oil storage tank;
c Connect the quick coupler on the top of transparent glass to compressed air tube and switch on the compressed air tube, while the indication of the vacuum gauge M/ill decrease;
d when the vacuum pressure lowers below 0.5 PA around: switch on the oil exhaust pipe and thus the waste oil will be pumped out of the engine and flows to the tank quickly via transparent glass .
3. Flow waste oil to the oil storage tank from transparent glass
Turn on the switch of transparent glass connected to oil storage tank, thus waste oil will be discharged to the oil storage tank from transparent glass .
4. Flow waste oil out of the oil storage tank
a Turn off the switch of transparent glass connected to oil storage tank (notice: If it turns on excessive air pressure may damage transparent glass and even persons; we will assume no responsibility for man-made injuries due to improper operation.); and switch off the ball valve.
b switch on the elbow that hooks the tank.
c Connect the quick coupler on the top of the tank to compressed air tube and switch on the compressed air tube, thus waste oil will be discharged via the elbow (notice: it may switch off the compressed air tube when the safety valve begins to exhaust.)
Notice: Air inflation must be available while pumping oil, by doing so it is to reduce gas consumption and pressure to realize faster pumping.
IV Troubleshooting
1. Solutions for non-reduction of pressure of the vacuum meter
a Check to confirm the air pressure is 8-10PA.
b Check to confirm all valves that should be turned off are in proper condition.
c Check to confirm sound sealing of transparent glass and oil storage tank.
2. Solutions when pressure of the vacuum gauge reduces, yet it fails to suck oil
a Check to confirm sound sealing of the oil drain pipe and oil exhaust pipe;
b Check to confirm whether the temperature of the waste oil is too low;
c Check to confirm whether the oil pipes are switched on;
d Check to confirm whether the oil pipes are stopped or contact the bottom of the tank.
V Tips for maintenance
Clean this machine to make sure it is without faults for many years
a Check the machine is with leakage or not regularly; if there is leakage, please repair after examination immediately;
b Check the tube is connected c1osely frequently;
c Do not keep the waste oil in bucket for1ong time to avoid corrosion to the bucket;
d Wipe the surface of the machine by using towe1 or cloth; keep the machine clean and place it in shadow to avoid direct sunshine.
){kind=link}